Ask Experts Questions for FREE Help !
Ask
    jilljustice's Avatar
    jilljustice Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 14, 2015, 09:39 PM
    Whirlpool duet DRYER ELECTRIC error codes F01 flashes
    I have a whirlpool duet electric dryer that turns on but won't start after 5 seconds it flashed f01 code what should I do to fix this
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #2

    Mar 14, 2015, 10:56 PM
    Here is a manual: https://dl.dropboxusercontent.com/u/...e%20Manual.pdf
    What you need to do after you clean every inch of the inside is to solder the circuit board: https://www.youtube.com/watch?v=JRw_0eGkMAs
    This is a common problem caused by a poor solder joint when many factories changed to the new higher melting point and lead-free solder. Look carefully at any components attached at the bad solder connection, like a bad resistor. Replace it if it's bad.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

What is whirlpool duet error code F01 [ 2 Answers ]

A five year old appliance stopped working after many successful washloads. On a next attempt to run the washer, after selecting appropriate cycle, spin and water temp, and pressing start, the unit powers off. i.e. All lights and selections disappear as if cancelled. We have tried turning off the...

Whirlpool duet dryer error code f01 [ 1 Answers ]

Receive error code F01. Cleaned all sensors but unable to test them as my ohm reader decided not to work today. Dryer will run perfectly during the first heat cycle. On subsequent heat cycles the pilot comes on but the gas valve does not appear to open and therefore not light for more heat. Could...

Whirlpool duet dryer error code f01 [ 1 Answers ]

What does an error code F01 on Whirlpool Duet Steam Electric Dryer mean? Pressed the buttons to start, lights go on as usual, but nothing happens and then it flashes F01

Whirlpool duet dryer error codes [ 0 Answers ]

Duet electric dryer displays F06 error code

View more questions Search