Ask Experts Questions for FREE Help !
Ask
    ajmessiera's Avatar
    ajmessiera Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 10, 2007, 07:47 PM
    Whirlpool Dryer Heats Intermittently
    Hi,
    I have a Whirlpool dryer Model# GGQ8858EQ1 that heats intermittently. I will turn on the dryer and the flame turns on but only heats up for 5 minutes then turns off. The dryer then runs the rest of it's cycle with no heat. I have tried replacing the fuse but that didn't solve the problem. I am thinking it might be the thermostat but the part cost around $21 and I cannot return it if is not the problem. I don't think it could be the ignitor because the flame still kicks on. Please advise.

    Ajay
    candykitten70's Avatar
    candykitten70 Posts: 34, Reputation: 5
    Junior Member
    		  
    #2

    Jan 11, 2007, 07:41 AM
    Get a stop watch and actually time how long the flame stays on. Then disconncect the vent hose and time it again. If it stays on longer with the vent disconnected, then you have a restricted vent. A simple try before investing any more money
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore Dryer - heats & runs but stops mid-cycle [ 12 Answers ]

I have been trying to figure out what exactly is up with our Kenmore dryer. We bought it new in 1997 and it has run like a champ till now. It still heats up and the drum still tumbles. In the regular drying cycle - you set the timer for 60 minutes and about 15 minutes into the cycle, the dryer...

Kenmore dryer heats, but won't turn [ 8 Answers ]

Relatively new belt... that's not the issue. Just installed a brand new motor thinking it would solve it... but it didn't. I've read that it might be the thermal fuse or thermostat, but that doesn't make sense. Those items control the heat and the heat is working fine. Does anybody have any...

Kenmore Dryer runs intermittently [ 3 Answers ]

My kenmore dryer model number 86082110 will run in the Wrinkle guard setting but will not in any other position on the selector. Please help??

Electric dryer heats up, won't start [ 1 Answers ]

I have a Kenmore Heavy Duty dryer that heats up, but nothing happens when I press that start button. By heating up, I mean I turn the timer dial and I can open the door, look inside, and see the glowing red heating element and it is still heating with the door open. Pressing the start button,...

Dryer works intermittently [ 6 Answers ]

My Kenmore dryer stopped working mid-cycle during a heavy laundry load (lots of jeans). You could push the START button, but it would only hum but not move. My husband opened it up, found some rubber bands that were keeping the dryer drum from turning. It then worked - for one load. On the...

View more questions Search