Ask Experts Questions for FREE Help !
Ask
    krafcar's Avatar
    krafcar Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 8, 2014, 04:31 PM
    What buttons to use to reset kenmore ultra wash quiet guard deluxe
    What buttons do I use to reset my keno more ultra wash quiet guard deluxe dishwasher?
    tickle's Avatar
    tickle Posts: 23,796, Reputation: 2674
    Expert
    		  
    #2

    Feb 8, 2014, 06:11 PM
    Have you tried the maintenance manual?
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #3

    Feb 9, 2014, 12:22 AM
    Look here: https://dl.dropboxusercontent.com/u/...Dishwasher.pdf
    https://dl.dropboxusercontent.com/u/...t%20codes.docx
    tacton's Avatar
    tacton Posts: 1, Reputation: 1
    New Member
    		  
    #4

    Feb 18, 2014, 10:23 AM
    Try Heated Dry, Normal, Heated Dry, Normal, Heated Dry, Normal. Run. All the lights should light up. Let run a minute then press Cancel/Drain and let it drain and shut off. It resets most Kenmores.
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #5

    Feb 20, 2014, 08:40 AM
    Look at these: https://dl.dropboxusercontent.com/u/...Dishwasher.pdf
    https://dl.dropboxusercontent.com/u/...ishwashers.zip
    Press: Heated Dry, Hi Temp Wash, Heated Dry, Hi Temp Wash, close the door, Start, Open the door, Cancel 2x.
    Or:
    1. Unlock you Kenmore dishwasher control panel by pressing and holding "Heated Dry" button for four seconds.
    2. Press a series of four buttons in quick succession: "Heated Dry," "Normal Wash," "Heated Dry," and "Normal Wash" to instruct it to run a short diagnostic test.
    3. Wait for two minutes while it runs the test.
    4. Press the "Cancel/Drain" button once it has completed its test. This should reset the dishwasher control panel and stop the "Clean" light from blinking repeatedly.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore ultra wash quiet guard deluxe not working. [ 1 Answers ]

Already unplugged it flipped the breaker and waited, and it still won't come on. Its only about a year old.

Kenmore Ultra Wash Quiet Guard Deluxe with oodles of black sludge... [ 1 Answers ]

Help! No matter how many times I wipe it away, the black sludge keeps coming back. I've taken the bottom wash spinner arm off and scrubbed everything. The sludge is thickest in the front bottom left corner. I do not have an owners manual. The model number is 665.13734K601. Anyone have...

Kenmore elite ultra wash dishwasher quiet guard 7 with the turbo wash. [ 1 Answers ]

I have a kenmore elite ultra wash dishwasher quiet guard 7 with the turbo wash. The middle spray arm has stopped spinning. I changed the feed tube going up to the arm, but to no avail. The feeder tube assemble didn't come with the Turbo section. I checked the water level and it seems adequate and I...

Kenmore ultra wash quiet guard 3 [ 2 Answers ]

The normal wash light keeps blinking and I can't get it to stop.

Kenmore ultra wash quiet guard deluxe dishwasher is stuck in wash cycle [ 2 Answers ]

I got a kenmore ultra wash quiet guard deluxe dishwasher for Christmas. My husband installed it and it seems like it is stuck in the wash cycle. It ran for an hour and a half and it never drained, so we finally shut it off. Any suggestions?

View more questions Search