Ask Experts Questions for FREE Help !
Ask
    pscales81's Avatar
    pscales81 Posts: 1, Reputation: 1
    New Member
     
    #1

    Feb 11, 2010, 07:49 PM
    Water dispenser problems
    I have a crosley iace maker fridge and my water dispenser is despensing a brown film in every cup of water I depisese as if it if dirty. I changed the filter and let water run through for about ten minutes but nothing changed.What is the problem?

Check out some similar questions!

Frigidaire refrigerator water dispenser ,dispersing water on its on on and off [ 1 Answers ]

My frigidaire refrigerator water dispenser, disperses water on its on when not in use. What can cause this?

Water flowing into ice maker when using water dispenser [ 1 Answers ]

I have a GE profile side-by-side refrigerator. I noticed that water was dripping from the ice maker and getting all over the food in the freezer. Also the ice was all clumped together and wouldn't dispense through the door. I cleaned everything and removed the ice maker and adjusted it to make...

Refrigerator Kenmore Coldspot No water coming out of water dispenser [ 1 Answers ]

Kenmore Coldspot refrigerator Feb 99 Model 57562792 – there’s no water coming out of the water dispenser, however it is making ice. The lines are not clogged. There is a small unit in the lower corner in the back where the main water line goes into. There are two waters lines coming out of it -...

GE Profile Refrigerator Water Dispenser is dispensing hot water [ 5 Answers ]

I have a 6 year old GE Profile top freezer with a water and ice dispenser. As soon as I changed filters today the dispenser is now dispensing very warm, almost hot, water. It was functioning properly just minutes before with the old filter. I have changed the filter twice/year since purchasing and...

Hooking up water line to refrigerator for ice maker and water dispenser [ 2 Answers ]

Here is my problem, I just bought a refrigerator that has an ice maker and water dispenser which by the way is a Haier PRCS25. I then purchased an ice maker kit from the hardware which came with a self piercing saddle valve. From here I connected the valve to a 3/4" copper cold line pipe...


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.