Ask Experts Questions for FREE Help !
Ask
    bigpitt77's Avatar
    bigpitt77 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 22, 2010, 12:35 PM
    Washer will not drain
    I have a old model whirlpool mod# LXR6432JQ0 Ser# CK 48834004 the washer does not drain starts its cycle to wash and it stops leaving all the water in the tub the timer stops I advance the timer to rinse it does its cycle and stops does not drain at all never moves on to next cycle. I have purchased another timer part no. 3948852 installed it correctly went over and over it to make sure it was installed correctly. After that I started the cycle started to wash and once again faced with the same problem. At first thought it could have been the Switch lid part no. 3953615 also has been replaced and still nothing. NOW WHAT? It seems to me I am spending more money on this piece of junk I would be better off buying a new washer, but I want to give it another chance before I drag the thing out of the house and dump it to get salvaged if its even worth that.

Check out some similar questions!

Water backing up from the drain on the washer machine,drain slow then overflows. [ 1 Answers ]

When water drain from the washer machine it backups and over flows on the floor. I have run a garden hose through the clean out and the water flows through the main pipe OK. Have gone up on the roof and try to run garden hose down through but hose only goes down about 4 feet. Should I try running...

Basement washer drain connection to existing floor drain [ 10 Answers ]

I am on city service. I would like to connect my basement washer drain into the existing floor drain (3" line). I cut the line about 3 feet down from floor trap and installed a 3x2inch y. This existing floor drain takes a 45 turn about 6" down from where I cut it. The 2 inch will drain the washer ....

New washer, drain backed up (fixed) but now washer keeps running [ 3 Answers ]

Our new washer was backing up in our older (1920) house's drain, I checked online and found this site and figured out how to create a water tight seal that works great, but now I guess it's not draining fast enough and I just realized the machine has been cycling for 2 hours. So not good. This is a...

Drain pipe for washer backing up once washer starts to empty what could be causing [ 4 Answers ]

What couild be causing the drain pipe fro washer to back up and spill all over floor behind washer

Must play with drain hose to get washer to drain and spin [ 1 Answers ]

Hi, I have a GE WCSE6270 Washer. After the washer fills and agitates, it starts to make a gurgling, clicking noise and will not finish the cycle (i.e. drain and spin). I noticed that the drain hose in the back was a little leaky, and in trying to play with it, it made the washer drain and spin...

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.