Ask Experts Questions for FREE Help !
Ask
    washerneedshelp's Avatar
    washerneedshelp Posts: 2, Reputation: 1
    New Member
     
    #1

    Nov 21, 2010, 12:26 PM
    Washer problem
    My washer has a code coming up when I push start. The code is F3. What does this mean?
    washerneedshelp's Avatar
    washerneedshelp Posts: 2, Reputation: 1
    New Member
     
    #2

    Nov 21, 2010, 12:28 PM
    It is a whirlpool gold Catalyst model # Gsx9885jq0.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore washer problem [ 8 Answers ]

Our kenmore is working fine but in past day it seems the agitator is starting to slip under load. Seems like a retainer nut or such has worked loose and under load the agitator just slips as the spindle inside clicks around doing its job. Under light load it works fine. Can you tell me how to...

I have a maytag bravos washer. I have a problem that when my washer is in rinse mode [ 0 Answers ]

I have awasher it's a maytag bravos, it fills with water when on rinse mode but does not kick on to spin mode it shuts off with an error code that reads ol on the screen and makes me start over again.what can I do

Toilet problem when using washer [ 1 Answers ]

Every time I do a load of laundry, the water level in my toilets goes way down but will overflow if flushed... and water and some dirt like stuff backs up into both tub drains. Had septic cleaned but it still keeps happening? Any help?

Washer drain problem [ 3 Answers ]

HELP the washer is in the basement and drains into a stand pipe.. it's the last thing on the line.. for 15 years no problem.. now there are times when water comes up out of the standpipe when the washer drains.. very inconsistent sometimes no water sometimes 1/4 cup sometimes 1/2 gallon.. we have...


View more questions Search