Ask Experts Questions for FREE Help !
Ask
    Bakequery's Avatar
    Bakequery Posts: 5, Reputation: 2
    New Member
    		  
    #1

    Sep 17, 2010, 04:23 PM
    Washer needs to be manually advanced to go into rinse cycle.
    What is wrong if a washer will not advance itself into the rinse cycle? If the knob is manually advanced it works fine. Someone is selling a 5 year old washer with this problem for $40 and I am wondering if it would be worth it to buy and repair myself.
    KBC's Avatar
    KBC Posts: 2,550, Reputation: 487
    Ultra Member
    		  
    #2

    Sep 17, 2010, 04:29 PM
    The mechanics of the timer for the cycle are bad.Replacement parts can be found on many sites.. you would have to get the exact model # and search for the part,it should all be in the same unit.. Timer.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Washer will not fill on rinse cycle [ 1 Answers ]

I have replaced the hot/cold water valve and the washer still will not fill on the rinse cycle. This only effects the cold water rinse warm or hot works fine. Help!

Washer does not switch to rinse cycle [ 1 Answers ]

My Whirlpool washer goes through to the rinse cycle and then stops. If I turn dial into the rinse cycle zone it then continues. Does it sound like the timer has gone bad?

Washer won't run the rinse cycle! [ 4 Answers ]

Does anyone have any idea what's wrong? Actually, no cold water is coming into the washer and YES the valve is open. Since there is no cold water... no rinse cycle. I have to rinse my clothes by starting it over and fill it with hot water.

View more questions Search