Ask Experts Questions for FREE Help !
Ask
    sweens's Avatar
    sweens Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 12, 2009, 03:41 AM
    Washer machine will not complete entire cycle. It gets to the spin cycle, and stops.
    I have a GE washer, (about 5 years old). The washer goes through the wash and rinse cycles fine. When it gets to the spin cycle, it stops. I can override and manually place the machine on spin. How can I fix this problem so the cycle runs through completely.
    Thank You
    curious001's Avatar
    curious001 Posts: 11, Reputation: 2
    New Member
    		  
    #2

    Aug 12, 2009, 07:02 AM

    I had the same problem with my Whirlpool model. Does this machine have electronic comands on the top? For some reason this type breaks down more often than the dial settings. It sounds like the sensor is bad you will have to call a repair man. I wish I had better news good luck and try to negotiate on price.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Washing machine that stops at spin and rinse cycle, any ideas why? [ 2 Answers ]

This washing machine has been working but the problem is when it gets to the spin and rinse cycle it stops, as if it just soaks in there and the water doesn't drain out. Any ideas what the problem could be and can it be fixable. I don't know much about washing machines, so easy terms would be...

Kenmore washer 70 series humming at spin cycle - won't spin [ 4 Answers ]

RE: kenmore 70 series model 110.20712990 Type 111 top load washer. Won't spin. Humming noise and a little burning/hot smell when supposed to be spinning. Bypassing the lid switch did not correct the problem. Changed out the motor coupling with no luck... still a humming noise but no smell.

GE Washer won't complete spin cycle [ 1 Answers ]

I bought my washer used. It works fine, until it gets to the spin cycle. It starts to drain, and after a few minutes it will begin to spin and stops. However, if it has no clothes in the tub, it will complete the spin cycle. Once in a while, it will complete the cycle with clothes in it, but it is...

Kenmore Washer Won't Complete Spin Cycle [ 0 Answers ]

Hi, I have a Kenmore 110.4549290 that will agitate, and even will spin up to and including the start of the rinse cycle. It then drains the first rinse water, puts in a couple cups of water, but does not go into the rest of the spin cycle. The timer can be heard running (quietly), and it shuts...

View more questions Search