Ask Experts Questions for FREE Help !
Ask
    Frustrated3's Avatar
    Frustrated3 Posts: 1, Reputation: 1
    New Member
     
    #1

    Nov 11, 2008, 05:23 PM
    Washer drain hose squirting water during spin cycle
    I have a Maytag washing machine that is 8 years old. It's worked just fine until recently. Halfway during the spin cycle, when the motor really "revs up", water squirts from the drain hose where it connects to the standpipe in the wall. An appliance repair person over the phone told me that it sounded like a plumbing issue. We had Roto-Rooter here twice and they found no clogs in our drains. We had an issue with insufficient slope of pipes under our crawl space where water seemed to be backing up, but we have remedied that and yet it is still leaking. I'm wondering if it is a faulty connection at the drain hose or maybe a motor problem. We're just stumped!! Any suggestion or ideas would be very appreciated!
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
     
    #2

    Nov 11, 2008, 07:11 PM

    Definatley a plumbing problem. Drain pipe is plugged or undersized. Could also be a vent problem. Can you take picuteres of the drain piping and post them here?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Washer Won't Go Into Spin Cycle, Doesn't Drain Water [ 2 Answers ]

I have a Maytag PAV5158AWW Washer. I recently had water in the basement that came up about 5 inches. When I went to run my washer today (about 3.5 days later when everything is pretty dry again), the washer would not go into spin cycle and won't drain the water. I used a screw driver to...

Drain overflows when washer is on spin cycle [ 2 Answers ]

My drain pipe fills and overflows before pushing the water past the trap on the washer drain cycle,my trap is not plugged.

Must play with drain hose to get washer to drain and spin [ 1 Answers ]

Hi, I have a GE WCSE6270 Washer. After the washer fills and agitates, it starts to make a gurgling, clicking noise and will not finish the cycle (i.e. drain and spin). I noticed that the drain hose in the back was a little leaky, and in trying to play with it, it made the washer drain and spin...

Kenmore washer still has water after spin cycle [ 1 Answers ]

I have a Kenmore washer 80 series model 110, After the spin cycle finishes there is still some water in the washing machine. We restart the cycle and then all the water is gone. This doesn't always happen, sometimes it works fine. Any ideas would be appreciated


View more questions Search