Ask Experts Questions for FREE Help !
Ask
    wcady's Avatar
    wcady Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 24, 2008, 11:28 AM
    Washer continues to fill and overflows during all cycle
    I have a whirlpool washer model number lsr5232lq0 that continues to fill during all cycles
    And overflows I can get it to work correct on small load setting.
    Can anyone tell me what to look for or what part to replace.
    Thanks in advance
    Wjc
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
    		  
    #2

    Feb 24, 2008, 11:59 AM
    Check the pressure switch
    ApplianceJunk's Avatar
    ApplianceJunk Posts: 5, Reputation: 1
    New Member
    		  
    #3

    Feb 25, 2008, 11:42 AM
    Hi,

    Also check the water inlet valve. It maybe sticking open.
    To test it out start filling the washer with water. Then turn the washer off at the timer during the fill cycle.

    Does the water stop at the same time you turn the washer off or does it keep filling for sometime?

    If the water inlet valve does not turn off at the same time you turn the washer off at the timer then replace the water inlet valve.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore Washer Won't Fill on Rinse Cycle [ 2 Answers ]

Everything else is working fine, it fills normal on wash, but not rinse, no matter what cycle such as perm press, ultraclean.

Drain overflows when washer is on spin cycle [ 2 Answers ]

My drain pipe fills and overflows before pushing the water past the trap on the washer drain cycle,my trap is not plugged.

Maytag washer: drain pipe overflows during rinse cycle HELP! [ 2 Answers ]

:eek: I have a new Maytag washer. (top load). During the drain cycle I hear the water pumping out but then the water comes back and will overflow at the top of the pipe and on the floor. The old washer did not have this problem. We used a snake, draino etc etc. in the pipe. Sometimes it will NOT...

Kenmore washer continues to fill [ 1 Answers ]

Hello. I have a Kenmore Elite Catalyst, model# 110.20052994. About a week ago, it would not drain. I even tried pressing the drain button on the control panel, but it did not work. So, I drained the water by hand and tried to run through another small load cycle. Now, the washer continues to...

View more questions Search