Ask Experts Questions for FREE Help !
Ask
    louie50's Avatar
    louie50 Posts: 1, Reputation: 1
    New Member
     
    #1

    Oct 31, 2010, 10:26 AM
    Voltage 220 verses 208
    I am using a espresso machine and know that the current from the outlet is 208. The applicance requires a yp-19 15 amp 220 volts. The machine acts sluggish, and does not heat hot enough,, is there anything on the market (boster) to juice the machine 20 volts? I have used a transformer to 220 volts and it makes a big difference. The tag on the back states 240 volts
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
     
    #2

    Nov 2, 2010, 03:42 PM
    Your voltage is 208, not your current, which is rated in Amperes. Your statement-"requires a 220V"... and the tag on the back says 240V" 208 to 220 is 5%+, 208 to 240 is 10%+. Yes, anything that heats up will be slower on 208 than on 220 and certainly on 240V. Your wattage(heat) will be 10% less and therefore slower and not as hot. Transformers are available but probably not worth the cost to get a few more degrees in your espresso.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Use of 208 Volt verses 240 Volt? [ 1 Answers ]

Pleas help me with the following. If an electrical device is used for heating purposes with a rating voltage of 240 volts, why does it take longer to heat up when connected at a 208 volt source. It seems to me that the current will be higher than a 240 volts and consequently the heating device will...

120/208? Confused on wall outlet voltage [ 4 Answers ]

I just moved into a new apartment building. When I plugged in my subwoofer, it started to pop every 10 seconds, something that it hadn't ever done before. I took out the multimeter and measured the voltage coming from the outlet, assuming that this may be what was causing the pop, and the...

Willi have to run a neurtal wire to 208 -3 phaze to get 220 volt eqiptment [ 0 Answers ]

I have a 208 3 phase braker pannle I want to get single phase 220 plasma Unit to work will I have to run nutral wire for ti to work.

208-220 single phase [ 1 Answers ]

Can I run a 220 single phase dc motor controller on 208 single phase ? Any help would be great.thank you Bob

208 vs. 220 volts [ 1 Answers ]

Is 220v terminology actually meaning 208v at my meter?


View more questions Search