 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Ul code------ comes on during spin cycle
The ul code comes on during spin cycle. I cleaned and greased the four tub balance rods, replaced, the bearings in the outer tub, the tub now spins freely, but still gets the ul code on spin cycle. How do I determine if the inner tub is bad. When I removed the inner tub it seems to have water in it. Are they suppose to have water stay in the outer tub? My model numner is wtw6600sw2 maytag. Thanks for any and all info
|
||||
Check out some similar questions!
Kenmore 70 seires why does my wash spin slow on one cycle and spin faster on another?
The tub on my kenmore elite HE3 will not spin for the wash, rinse or spin cycles. The motor is making the usual sounds like it's supposed to but the tub just does not budge.
I have a whirlpool washer, I replaced the outer tub and the drive block, but it now doesn't spin. It drains the water, I can hear the motor come on, and feel the vibration . The switch is fine. I looked at the couple, but did not take it apart. The clutch looked fine, sanded the pads and case....
We have a Whirlpool Duet front loader which is 7 years old. We keep getting a F11 error code which according to Whirlpool means -Motor Control internal failure-during high speed spins. We have heard a strange noise-though it's not a constant noise during the spin cycle. I tried the thumb on the...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
