I have to use my indoor cut off valve to keep the hot water from running out of the tank. Note the hot water faucets were not inuse any where in the house. Do you think it's the hot water tank or a broken hot water line some where in the slab? Note the cut off valve is on the cold water entering...

I turned the main water off to our home to remove our water softener and ran the water in the kitchen and both bathrooms until no water came out. Now there is no hot water pressure or hot water at all sinks after turning the main water back on, but there is normal cold water and cold water...

Can anybody help me?? I am getting hot water going into my cold water tank, and this is causing water to come out the overflow. If I run the hot water tap it stops, and then when the hot water tank has filled again, the cold water tank overflow starts again.

Replaced a hot water tank, turned the pump on and the water is bypassing the pressure tank. The pressure tank will not fill up and the pump remains on and will not shut off. We do get water though but needs to shut off the pump so it will not burn out. Any thoughts? Thank you Any ideas will...

My bathtub hot water faucet has a leak, and I cannot find any valve to turn off the flow to the faucet. If I turn off the water to the hot water tank, would that damage the tank or cause other problems?