Ask Experts Questions for FREE Help !
Ask
    WildeWolfe's Avatar
    WildeWolfe Posts: 1, Reputation: 1
    New Member
     
    #1

    Aug 2, 2010, 10:28 PM
    Stud blocking damper for a vented microwave
    I just purchased a new home. The kitchen cabinet plans were designed for a over-the range vented microwave. We noticed after takijng poseesion that there is a good portion of a stud that is partially blocking the left side of the 3 1/2" x 10" opening that the builder precut. What is the best to fix this problem so the stud will not interfere with the damper operation at the rear of the microwave?
    kryostar's Avatar
    kryostar Posts: 108, Reputation: 11
    Junior Member
     
    #2

    Aug 3, 2010, 12:34 AM

    you can just cut it out of the way, or pry the whole 2x4 out, it's not load bearing, you or your house won't miss it. You wouldn't believe how much structural framing is cut,drilled,knocked out with a sledge hammer to make way for the plumbing,electrical,HVAC, It'll be fine,you could even try to just knock it over enough, so as not to interfere with damper operation. GOOD LUCK!

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Vent Damper for Microwave Range Hood Duct? [ 13 Answers ]

I live in very cold winter climate and I am looking for ways to reduce loss of warm air. One obvious source is the over-the-range microwave vent. As far as I know, the only thing between the range vent and the outside is a chinzy little flapper on the microwave. It flaps in windy weather, which...

Can a counter top microwave be used as a built in microwave [ 1 Answers ]

I have a space created to install a built in microwave in my kitchen, can I just put a regular counter top microwave oven in that sapce and have the steel frame around it. Will it ensure proper ventilation and is it safe to use it like this. I want to know the difference in a counter top microwave...

How can I install a vented microwave ventless [ 2 Answers ]

How can I install a vented microwave ventless?

Minimum distance between gas range and vented microwave? [ 3 Answers ]

Can someone tell me what is the minimum (acceptable) distance from range top to bottom of microwave (with outside vent) thanks

Why use a vented bottle trap [ 1 Answers ]

I have a house which has not got a conventionally vented tiolet soil pipe The bathroom sink is fitted with a vented bottle trap which presumably vents smells going from the tiolet soil system but it would vent the smell into the bathroom so why fit a vented bottle trap which frequently leaks water...


View more questions Search