Thank you. I flushed my hot water heater last night. I only turned the cold water intake to the heater off and on BUT now, after the flush, my second floor bathroom sink faucets (both hot and cold) don't work at all. The shower and the tub in the bathroom work but NOT the sink- HELP! Thanks so...

It has happened before and a repair person jumped it and ordered a thermacoupler but it has lasted a year. I want to try it again myself to see if I can avoid a bill. The pilot light is lit.

My main burner will not light. After the hot water heater power cycles three times, the hot water heater shuts down and the following error code is displayed: 100110 which the owner's manual says is System Lockout Things I have tried: Repositioned the igniter assembly several times...

I have a state gas hot water heater approx. 6 yrs old. It started shutting off, I'd have to go down unplug it and plug it back in. It would heat up then a day later I'd have to do the same thing. Do you think iI need to replace the unit or is there parts available to fix it

I cannot get the pilot light to stay lit on a 50 gal "State" gas hot water heater, Model PRX50NBRT. I have followed the instructions on the front of the tank. I just had a black out and the light goes out without power. This has happened before, and has been tricky in the past. I forgot...