Ask Experts Questions for FREE Help !
Ask
    onefirstlove's Avatar
    onefirstlove Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 16, 2011, 11:47 PM
    Standpipe overflow
    If I reduce the diameter of the drain tube from the machine to the stand pipe will it not overflow?
    creahands's Avatar
    creahands Posts: 2,854, Reputation: 195
    Ultra Member
    		  
    #2

    Feb 17, 2011, 01:12 AM

    If u reduce the size of hose from washer u will cause back pressure on motor. This could shorten the life of machine and would not stop overflow problem.

    Has the overflowing been going on since machine installed?

    If since installed u may have to use a closed system. This will cause back pressure, but not as much as a smaller hose.

    Chuck
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Laundry standpipe overflow [ 10 Answers ]

The standpipe that our washing machine drains into recently started overflowing. It's only a small amount at a time, creating a tiny puddle that runs in front of the machine. It seems to happen during the rinse cycle. There's no noticeable odor or sudsing. Any idea what could be causing this...

Standpipe overflow [ 8 Answers ]

First let me say how impressed I am with this site and your willingness to help DIY'ers. For some background; We have a 30+yr old house designed and built by an old school DIY'er. Suffice it to say we have discovered some interesting engineering. He obviously had a good supply of 2" drill...

Standpipe overflow [ 1 Answers ]

I wasn't sure, so I copied this over from the plumbing forum. First let me say how impressed I am with this site and your willingness to help DIY'ers. For some background; We have a 30+yr old house designed and built by an old school DIY'er. Suffice it to say we have discovered some...

Overflow Standpipe [ 6 Answers ]

New washing machine with plastic drain hose perhaps too long for a 2'' diameter 36'' high copper stand pipe. Water over flow from stand pipe when washing machine is draining? What happen? Please help.

Wall standpipe overflow [ 3 Answers ]

The wall standpipe for my 10 year old washer machine overflows as the washer discharges water during the cycle. This problem only happened very recently. I tried to run the snake down the pipe but it only went about 2 feet and couldn't go any further. I also noticed the pipe is very rusty as I...

View more questions Search