I have a stackable Kenmore washer dryer and the dryer is not producing any heat. I do have 120 volts reading through the heating coils but they are not glowing red like I thought they would and definitely not producing any heat.

Dryer drum rotates, and it responds to the "cycles" dial, but the heating element doesn't heat up. Is there a reset button somewhere, or do I need to replace the heating element, OR? Thank you.

How to close the panel in the front of the unit? I replaced the door switch but can not close the panel door. Help

When starting a wash load on my stackable kenmore washer/dryer it starts to fill with water and it clicks. The lights in my house were dimming off and on and the washer sounds like a car trying to start.

I have a 14 year old Kenmore stackable unit, spent several hundred dollars here and there every few years to have the dryer belt fixed, etc. Now the washing machine portion, it will start a wash cycle, then stop, leaving the water to sit in the barrell. A repair guy said its not worth replacing the...