 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Probably the inlet screen on the water valve on back of washing machine is clogged up. Remove the hoses and look at both screens. Take a pair of hemostats and remove the screens and clean them well with an old toothbrush and replace them. Look at the hoses to see if there are screens on them, too. If you still have any problem then the water valve is faulty, but see if this cures the problem, first.
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
My washing machine stopped filling with cold water when necessary. Because it was an old machine and sometimes didn't spin out, I replaced it. The new (used) machine also doesn't have cold water. The valve works just fine, but has a little drip. Unless I am incredibly unlucky and have two...
How to stop washing machine from draining out water slowly while filling
The house was built in 1968, I had it snaked and was told there was no obstruction, so I piugged the drain and now its comes up the shower drain
Washing machine drain water drains into laundry tub next to the washing machine. There is sand in the water. What causes this and how can it be fixed.
When the washing machine drains, the toilet in the next room gurgles and the bowl partially fills. I have taken these steps: Ran hose down vent pipe on roof. No backup noticed. Had plumber snake from outside wall cleanout by washing machine and 1/2 bath toilet to city sewer line in alley,...
View more questions Search
|
