Ask Experts Questions for FREE Help !
Ask
    harryz's Avatar
    harryz Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 30, 2006, 03:47 PM
    Removing Maytag washer door boot spring
    I have a Maytag Model MAH6500AWW with a door boot that has a slit cut into it and leaks. I can disassemble the machine down to the point of removing the tub spring that applies tension to the boot cable holding the door boot onto the tub. There is a lot of tension on that spring. How do you remove the spring and more importantly how do you put the spring back on? Is there a tool that can assist with this?
    glenn4438's Avatar
    glenn4438 Posts: 7, Reputation: 1
    New Member
    		  
    #2

    Nov 3, 2010, 06:09 PM
    Use two people to reinstall the spring . One to hold it while the 2nd stretches it around . No tool that I know of and I do this for a living
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

MayTag freezer door opens when refrigerator door is closed [ 2 Answers ]

Hi, I'm new here. I have a 9 year old Maytag refrigerator with a freezer on top. Recently whenever I close the refrigerator I notice that the freezer door pops open. I looked at the seals around it but can't see anything wrong. I did notice that I can simply tap on the door and it will...

Removing sliding door from fiberglass shower [ 1 Answers ]

Hello, We are in the process of having a new home built and there is a Lasco (fiberglass) walk in shower in the bathroom. We had told the builder that we did not want a sliding door on the shower but wanted a door that swings open (without a header on top since my husband is 6'3 and no tracks...

Sears garage door opener spring [ 1 Answers ]

I have a garage door opener that I purchased from Sears less than 2 years ago and I took out the extra warranty.. DO the warranty usually cover the breakage of the spring on the door itself? If not is it a easy job one could do himself? Or is something a professional should do? Thanks

View more questions Search