 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Kenmore Front Load Washer Selector Handle
The selector handle came off my 10-year-old front-load Kenmore washer, model 417.29042991. There were 3 loose "teeth" (about 2 mm square), plus the washer and spring behind the handle, so I'm pretty sure I can't just plunk the part back on.
How involved a repair are we talking about? Is it relatively easy to remove the front panel, buy the parts and put them on? Or should I call a pro in? (We'd pay a maximum of $75 for the repair, given we have a policy in place). The washer is in excellent condition save for this, and the matching gas dryer works perfectly, so I don't want to consider replacing the appliances themselves. Thanks for any advice. |
||||
Check out some similar questions!
Kenmore front load washer
[ 1 Answers ]
I have a Kenmore front load washer model 417. The rest I don't know. They put the tag behind the door and with the moisture and heat it wore the numbers off. Anyway, here is my problem. When you press the start button everything seems fine, you hear soleniods clicking and all, but after about 20...
Kenmore front load washer won't agitate/spin if load too heavy
[ 2 Answers ]
My Kenmore front loading washer, model 417.43042200, won't agitate or spin to complete the cycle if the load is too heavy, such as 5 bath towels. If I take off the back and help turn the drum in the agitate or spin mode it will agitate/spin and complete the cycle. The pump still drains the tub. If...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
