 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
The washer tries to spin but only makes a loud rapid clicking sound. The motor coupler is OK. I replaced the clutch which was badly worn but no improvement. I am now trying to remove the basket following the Whirlpool manual but after removing the spanner nut the tub will not lift. I have tried...
I have a Whirlpool GST9679PW2 washer that won't spin. It stopped in a middle of a cycle. It looked like it had finished, no water in the tub but the clothes were wet. I tried to move the dial to different spin cycles and it wouldn't spin but you could her a humming noise. Can anyone tell me...
I have a whirlpool washer that will not go into final spin. You have to manual turn the tub clockwise about two turns, Re-set the switch to final spin, close the lib, then it will go into final spin. What is the problem or do I need to replace the switch. Thank YOu;
It goes through the wash cycle and won't spin.then at times it goes through the wash cycle and spins just fine.please help
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
