Ask Experts Questions for FREE Help !
Ask
    cw1259's Avatar
    cw1259 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 16, 2007, 09:12 AM
    Can not get element out
    I have a kenmore Dryer 110.86545100,can not get element out?
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
    		  
    #2

    Sep 16, 2007, 09:39 AM
    Can you acces this from the front or back? 29' model remove from back and 27' remove from the front? If rear access, remove the top of the cabient and disconnect the strap that holds the top of the riser. If accessed from front, remove the kick panel and it is on the right side.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Changing heating element [ 1 Answers ]

I am trying to change the heating element in kenmore dryer... I can't get to the stupid element... can someone help me... :mad:

Dryer element on and off [ 1 Answers ]

I have an electric dryer that does not dry well. The heating element comes on and off. The exhaust is not blocked.

Help fixing a dryer element [ 2 Answers ]

I have a whirlpool washer/dryer stack about 10 or 12 years old! My problem is when I use the dryer on normal heat it doesn't work it blows cold air, but when I cycle it to delicate heat it blow really hot air! So I'm thinking it's the dryer element and I took the back off my dryer and I can not...

Kenmore heating element [ 1 Answers ]

I have a Kenmore dryer six years old. I just got problem there is no heat. Then I change the heating element. It work find for two cycle each cycle took 60 minutes then it quit working then I did Change again It repeat the same problem so what's wrong? Would you give me some asvise to trouble...

View more questions Search