Ask Experts Questions for FREE Help !
Ask
    innkeeper9's Avatar
    innkeeper9 Posts: 20, Reputation: 1
    New Member
     
    #1

    Jul 13, 2012, 10:21 PM
    Searching for amps on gas dryers
    Most plate data gives you something like 120V 60hz 10amps, this is on my washer. However, my gas dryer has a plate that says 120V 60hz 6 A, Gas NAT Input: 22000 btu/hr.

    Is that 6 A referring to amps? I have tried every place I can think to find out how many amps the dryer uses, after all it uses electricity for the motor at least. I even tried to find the motor and see if I could get it there, but all the motor information says is it's 60hz.

    Does anyone know how to find out this information. Thank you very much.

    Ruth
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
     
    #2

    Jul 14, 2012, 05:35 AM
    Yes, the 6 A refers to the 6 amp electrical input requirement of the dryer.
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
     
    #3

    Jul 14, 2012, 05:39 AM
    6 amps sounds about right for a dryer motor .
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
     
    #4

    Jul 14, 2012, 07:55 AM
    You can prove it out with an Amprobe, just clamp around the wire and read Amps.
    If you have a need to see the current used on different things, they are a good investment.
    innkeeper9's Avatar
    innkeeper9 Posts: 20, Reputation: 1
    New Member
     
    #5

    Jul 14, 2012, 10:28 AM
    Everyone, thank you for your help. This has been driving me nuts, especially since the manufacturer service/help couldn't find the info and no one seemed to know what the 6 A meant.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Changing natural gas to propane dryers [ 1 Answers ]

I currently have a propane dryer I am buying a new gas dryer Will I need a conversion kit to prop[ane or will current gas connections work on new dryer?

Roper gas dryers [ 0 Answers ]

My dryer just quit... checked breakers.. ok... door closed tight, power to the plug outlet was checkes.. ok... Is there a reset button somewhere?

Gas Dryers [ 2 Answers ]

How does one completely remove all the lint in a dryer, not just in the"lint trap"

GE gas dryers [ 1 Answers ]

Lighting the pilot on a GE dryer

Electric Dryers with a gas conversion [ 3 Answers ]

I have a Kenmore Elite Dryer but we put a Gas conversion on it 2 years ago because it was an old house and it wasn't set up for an electric dryer. Well since then I have divorced and used another old dryer. The old one died on me and is making a clicking sound. So I would like to take the gas...


View more questions Search