Ask Experts Questions for FREE Help !
Ask
    zachmarc's Avatar
    zachmarc Posts: 1, Reputation: 1
    New Member
     
    #1

    Jan 4, 2010, 06:14 PM
    Room vented microhood questions
    I installed a Kenmore microhood Model 721.80492 about 1.5 years ago and initially wanted to vent it to the outside. I haven't been able to vent the unit to the outside(wife changed her mind) and now I just want to room vent the microhood so it's easier. Well, when I initially set up the unit I used snips and cut out the "knockouts" on the blower plate. Can I still vent the hood into the room or did I totally mess up by cutting out the "knockouts" on the blower plate? Please advise. Thank you

Check out some similar questions!

Microhood ovens [ 1 Answers ]

I am trying to find a microhood that will fit under the older style cabinets. The standard height of 16-17" does not allow for enough room over the stove. I need to find a model that is 12-13" in height. It is had to believe that a manufacturer has not come along to address this need. I have...

Venting Microhood [ 1 Answers ]

I paid extra money to have my microhood vented outside. The vent is a 3 1/4 X 10, which converts to a 4" and vents outside the townhouse. Everything I read states that it must be at least a 6" round to get the proper CFM. The HVAC guy showed up today and is in total disagreement. He stated it...

Microhood installation [ 7 Answers ]

I am planning to upgrade my kitchen & I want to replace my fan hood with an over the stove microwave oven. The fan hood that is now in place vents to the outside through the house wall. The cabinet over the fan is 18 inches high and I plan to replace it with a 12 inch cabinet to accommodate the...

Microhood vent to outside [ 4 Answers ]

I have a couple quick (hopefully easy) venting questions and I'll provide more details as requested. 1) how does one go about connecting 3 1/4" x 10" ducting together? I want to make a short flange piece that feeds from the inside of the kitchen wall (behind the microhood) heading outside where it...

Microhood install [ 1 Answers ]

I purchased a microhood and the install guidel recommends a dedicated line with 20 amp circuit. The microhood is rated at 1100 watts. Can I use a 15 amp circuit. Only other thing running are some garage lights. Thanks for the help.


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.