Ask Experts Questions for FREE Help !
Ask
    bcutshall's Avatar
    bcutshall Posts: 1, Reputation: 1
    New Member
     
    #1

    Apr 3, 2012, 04:09 PM
    Remotes won't work; wall push will
    Have old model genie from 1983 on double door with no sensors at bottom; wall push button works fine raising and lowering; we have 3 remotes (batteries in all are fine); but all remotes quit working on same day; then they would work for couple of days and quit for a week; now remotes have quit ; think for good this time. I've jiggled all the wires, to no avail.. My email is [email protected]... or give advice to me on board. Thanks, Betty C.

Check out some similar questions!

Garage Opener: Remotes won't open, only close. Wall unit always works (not locked) [ 5 Answers ]

Here's a curious one. My garage door opener (chain driven) works the door fine. The wall unit controller operates the door just fine. It's ALL the controllers that won't work. I have two individual remote units, one outside wall mounted remote unit, and one internal car unit. They will all...

How to syncronize 1 keypad, & 2 push button garage opener remotes [ 2 Answers ]

I have a craftsman garage door opener & I can't get the keypad and the other remotes syncronized at the same time. I know how to syncronize each individually but to get them to work together has been a problem. Does any one have any Ideas?

3-Way Hampton Bay with Wall remotes? Help! [ 3 Answers ]

Ok here's the deal and please bare with me, this might be kind of long. Anyhow here goes. I bought a new Hampton Bay fan that came with the remote control. It came with a wireless remote control and the receiver is built in to the fan housing. The previous fan was wired to three switches. (A...


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.