Ask Experts Questions for FREE Help !
Ask
    daunters111's Avatar
    daunters111 Posts: 2, Reputation: 1
    New Member
     
    #1

    Feb 12, 2012, 08:03 AM
    Reclaimer 80 furnace?
    I have a “Reclaimer 80” “Comfort Aire” Model “GYUA120-E5N” made in Jackson Michigan.
    The problem is not heat is being made by the furnace.
    The exhaust blower runs constantly.
    I have taken off the cover and there are no flames or red spots on anything.
    It states in cover this furnace has not pilot light in the furnace.
    I have never dealt with a non-pilot furnace, so this is new to me.
    I have turned what I believe is the gas feed valve (control unit) off and back on as it says on the inside of the cover.
    I have shut the power off to the furnace as stated inside the cover, but this has not fixed the problem.
    I have not found any reset buttons to reset.

    Any help would be appreciated.

    Mike
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
     
    #2

    Feb 13, 2012, 09:48 PM
    Have you checked with a volt meter to see if power is getting to gas valve? You will need a meter to see what is going on. There is no other way. You cannot guess at it.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How to wire my greentek hrv to kicks on the furnace fan on low of a heil furnace? [ 0 Answers ]

How to wire my greentek hrv to kicks on the furnace fan on low of a heil furnace? I had a airconditioner installed in August and for some reason they unhook my hrv so now the hrv turns on but doesn't request the furnace fan to come on. So now it's not circulating the air in my house properly. I...

XB80 Gas Furnace , furnace fires up fan turns on but no airflow in ducts [ 2 Answers ]

Furnace fires up just fine, and fan spins but there is absolutely no airflow in duct work. Any ideas? Last spring thermostat went out and I replaced it, worked great. A month later circuit board burned out, tech found that problem and replaced it (major pocketbook ouch) and everything worked...

XB80 Gas Furnace , furnace fires up fan turns on but no airflow in ducts [ 0 Answers ]

Furnace fires up just fine, and fan spins but there is absolutely no airflow in duct work. Any ideas? Last spring thermostat went out and I replaced it, worked great. A month later circuit board burned out, tech found that problem and replaced it (major pocketbook ouch) and everything worked...


View more questions Search