Ask Experts Questions for FREE Help !
Ask
    seagroselady's Avatar
    seagroselady Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 14, 2006, 06:06 PM
    Range problem
    I have a Jennair model # 89353 and am trying to wire it to 240 volts. I need really to know which wire is which in the hook up, which is L1 which is L2 and which is neutral. Any help would be hot.
    andrewcocke's Avatar
    andrewcocke Posts: 439, Reputation: 22
    Full Member
    		  
    #2

    Dec 14, 2006, 06:36 PM
    Typically, black and red are the hots, and white is the neutural, with green for ground.

    If your cord is a three prong, then black and red are the two 120 volt leads, with white being the neutural.

    If you have a 4 prong, then the fourth line will be ground, strap this to the chassis of the range, normally the manufacterer provides a grounding lug on the appliance.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Whirlpool range [ 2 Answers ]

I purchased a Whirlpool range (model gw395leptoo) in April of last year. Thanksgiving day the satrt button failed. It was under warranty. A technician replaced the control board and keypad. Everything was fine. In August the keypad would no longer take any key presses. I purchased a new control...

GE Electric Range [ 6 Answers ]

Help! My electric Range is 3 years old. The range timer and clock are working,however the oven nor the surface units heat up. Does this sound like something I can repair myself or should I be calling a repair person?

Range [ 1 Answers ]

Hi, my gas range oven has quit working. My wife tried to use it and the igniter didn't try to start the pilot. Let me explain a bit clearer: I have an older gas stove the top burners work okay but the other day the oven would not light so I checked to see if the pilot was lit and it was not lit....

View more questions Search