Ask Experts Questions for FREE Help !
Ask
    realmrburns's Avatar
    realmrburns Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 3, 2012, 05:45 PM
    Power Vent won't go through more then one cycle?
    For the last 3 months the water heater will not go through more then one cycle before having to be unplug.Any ideas?

Check out some similar questions!

Furnace power vent soot [ 1 Answers ]

Furnace has been cleaned, adjusted several times. Every year there is soot getting into the basement. It is a oil boiler furnace with a power vent. Person repairing says it needs a chimney. Power vent replaced 5 years ago. Problem just started 2/3 years ago. Not sure it needs a chimney. Any...

Disconnect a power vent [ 3 Answers ]

I built a chimney to replace a stinky power vent on an oil burner.Besides venting the 6-inch smoke pipe into the chimney what do I disconnect or change on the power vent?

Rheem power vent ater heater: Vent stays on, no ignition [ 0 Answers ]

I have a Rheem Power Vent 21VP40E-1 tank water heater. The vent fan stays on constantly but there is never an attempt to ignite. I have reset the unit, but problem persists. Any suggestions from the informed?

Trip breaker 4 Power vent [ 1 Answers ]

Hi, I have a power vent hot water heater. About once a week the circuit trips. It is a dedicated line with 15 amp circuit breaker. Any ideas why??

Furnace doesn't start unless I cycle power [ 1 Answers ]

My furnace is 6 years old. I have 3 zones with a Honeywell zone controller. I replaced the ignition module and noticed and replaced a cracked gas exhaust tube - the tube that leads to the condensate trap. The furnace will work fine once I cycle the power. However in the morning (after all...

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.