Ask Experts Questions for FREE Help !
Ask
    LDVMoore's Avatar
    LDVMoore Posts: 1, Reputation: 1
    New Member
     
    #1

    Jul 7, 2008, 08:09 AM
    New Kenmore dishwasher will not start following installation.
    My newly installed Kenmore (Ultra Wash) dishwasher Model 665. 1384 will not start washing cycles. Upon pushing the "Smartwash" cycle button, the light above both the "Smart Wash" and the "Heated Dry" cycle buttons light up, no machine start is initiated, and both lights go out after 30-45 seconds. No wash water has entered the machine. The water supply valve is verified as "on". Can anyone please offer a "start sequence" code that I might attempt to get this machine operational before I need to contact the Sears service people? Thank you for your assistance.
    Credendovidis's Avatar
    Credendovidis Posts: 1,593, Reputation: 66
    -
     
    #2

    Jul 8, 2008, 04:02 AM
    Personally I can not help you with a specific advice. Neither can others, I see (so far).

    Just try the on-line service link to Sears. Maybe there is information or technical assistance available there !

    Try any of the following Sears links :

    Sears on-line website

    http://www.sears.com/Service

    http://www.searspartsdirect.com/partsdirecta

    http://www.searspartsdirect.com/partsdirectb

    Success!

    As always : if you require more info, please let me know. If this solves your problem, please rate the answer provided! Feed back is always appreciated!

    ;)

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore Dishwasher won't start [ 25 Answers ]

Hi, I have a Kenmore Ultra Wash Dishwasher (model 665.1588) that will no longer start. Its roughly 4 years old. The Cancel/Drain button starts the 2 minute drain cycle, so I know its getting power. The China/Gentle light is the only cycle light that lights up (but I can't start it either). ...

Kenmore Elite Dishwasher Won't Start [ 3 Answers ]

My dishwasher had been working for more than three years. Suddenly, it will not start and the Quick Rinse light is flashing. All control panel buttons became inactive. The Model/Serial is 665.15959000. I am trying to reset the dishwasher or run diagnostic so I can find out which part need to be...

Dishwasher kenmore will not start [ 1 Answers ]

I have a kenmore 15529 dishwasher, The problem I have is nothing is working. The lights come on but past that there is no water that starts to come on and after a short while you smell a burning odor. Does anyone know what could be wrong or what to do. Thanks so much!! :(

Kenmore dishwasher won't start [ 2 Answers ]

I have a model 587.1551590 and it won't start. It was relunctant for a few times.. after flipping switches and turning dial managed to get it started but don't know which switch or button "fixed" it tempararily... When it did start the wash cycle worked fine. Now I can't get it start at all. I...

Kenmore Elite Dishwasher Not Start [ 1 Answers ]

Dishwasher does not start. Checked electrical panel, diswasher connection, door switch all OK.


View more questions Search