Ask Experts Questions for FREE Help !
Ask
    BIGFISHTUNA's Avatar
    BIGFISHTUNA Posts: 1, Reputation: 1
    New Member
     
    #1

    Apr 23, 2012, 03:56 PM
    Motor #S62NXPLP-7624 OR #3377333 WINDINGS OHMS?
    this motor is a whirlpool dishwasher # 3377333 forward reverse type on a kenmore 665.15973992 or the clone whirlpool 7du920pwk so

    what resistance should be measured across the 4 terminals to each other and to chassis? Thank you in advance
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
     
    #2

    Apr 23, 2012, 10:59 PM
    It should be open to chassis, never any reading. You have common and the speed wires, so between the common and the speeds they will get progressively higher as you go from high speed to low.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Changing windings 480/277v to 208v/120v? [ 0 Answers ]

I have a Generac 480/277 35kva back up generator. We are changing the in coming service from 480/277v 3 phase to 208/120 3 phase. Can the windings on the Generac be change for this new service ? Or do we have to purchase a set down transformer and place it just past the transfer switch on the out...

Transformer has 20 windings 100 secondary windings secondary voltage is 25V [ 1 Answers ]

A transformer has 20 primary windings and 100 secondary windings. If the secondary voltage is 25V, find the primary voltage.

Sewage pump windings gone? [ 1 Answers ]

We have a tank in our garden, where all our waist goes from the house. When it reaches a specific level a pump starts and pumps the waist up hill to the mains sewage system. One of our pumps isn't working at all. I've had it out and checked it over. The pump is turning freely. The only thing I...

Normal Operating Ohms for a Washer Motor [ 1 Answers ]

I was wondering if any one new the nomral operating ohms for a washer motor... any kind of just a general ohms.. thanks

What is better 4 ohms or 2 ohms [ 4 Answers ]

I know that the sub and the amp have to match but what is the difference in the two different subs and which is better


View more questions Search