Ask Experts Questions for FREE Help !
Ask
    Dale Houle's Avatar
    Dale Houle Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 16, 2014, 01:23 PM
    Model wed9500tw2 error code f01
    What does this code represent and what part do I need to fix it
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Sep 17, 2014, 01:28 PM
    Dishwasher, washer, dryer, heater, little help here?!
    WallyHelps's Avatar
    WallyHelps Posts: 1,018, Reputation: 136
    Ultra Member
    		  
    #3

    Sep 17, 2014, 05:46 PM
    I believe the service manual says to replace the main control board (expensive).
    Before doing that, check out this post for a possible free fix. Look for the answer by user "v111".

    Good luck!
    WallyH
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #4

    Sep 18, 2014, 03:59 PM
    It is a stuck relay on the control board and the relay is in a little plastic box soldered on the control board. Tapping it with a screwdriver unsticks it, but if it sticks again you can get another one and solder it on the board yourself with parts from Radio Shack and order the relay online if Radio Shack does not have it; plus you can buy one with a higher amperage rating on contacts and it will not fail again, most likely.
    Here are some manuals: https://dl.dropboxusercontent.com/u/...0Job%20Aid.pdf
    https://dl.dropboxusercontent.com/u/...e%20Manual.pdf
    https://dl.dropboxusercontent.com/u/...Electronic.pdf
    You can test the relay with a good digital multimeter, but you will have to use a razor knife to temporarily cut a couple of circuit board circuits in order to test it.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

What is whirlpool duet error code F01 [ 2 Answers ]

A five year old appliance stopped working after many successful washloads. On a next attempt to run the washer, after selecting appropriate cycle, spin and water temp, and pressing start, the unit powers off. i.e. All lights and selections disappear as if cancelled. We have tried turning off the...

Whirlpool duet dryer error code f01 [ 1 Answers ]

Receive error code F01. Cleaned all sensors but unable to test them as my ohm reader decided not to work today. Dryer will run perfectly during the first heat cycle. On subsequent heat cycles the pilot comes on but the gas valve does not appear to open and therefore not light for more heat. Could...

Whirlpool duet dryer error code f01 [ 1 Answers ]

What does an error code F01 on Whirlpool Duet Steam Electric Dryer mean? Pressed the buttons to start, lights go on as usual, but nothing happens and then it flashes F01

I have a Whirlpool duet Sport with error code F01 [ 1 Answers ]

Is this an easy fix?

View more questions Search