Ask Experts Questions for FREE Help !
Ask
    anac0nda's Avatar
    anac0nda Posts: 3, Reputation: 1
    New Member
     
    #1

    Feb 14, 2009, 05:02 PM
    Maytage druger
    I have a couple question to ask why my Maytage Gas dryer is not Hot enough.. I hear the clicking noise... Everything seems to be working find...

    ..?
    anac0nda's Avatar
    anac0nda Posts: 3, Reputation: 1
    New Member
     
    #2

    Feb 14, 2009, 05:07 PM
    Maytag Dryer
    Dryer is not hot enough, it makes clicking noise.
    Flame sensor..
    Flying Blue Eagle's Avatar
    Flying Blue Eagle Posts: 2,056, Reputation: 225
    Ultra Member
     
    #3

    Feb 14, 2009, 07:39 PM

    AnaConda- FROM what you have said , it could be one of two things.#1- The gas burnner or #2 it could very well be the ( AIR SHUTTER ) out of adjustment ; I used to find that this was more the cause of trouble then anything ;; #2- AIR SHUTTER CHECK OUT>-
    FIRST,REmove the lower access panel, Look at the FLAME,And if the flame is a light blue and has a roaring sound, indicates that it has too much air comeing to it OR IF THE FLAME is
    Alight blue ,with YELLOWE TIPS , this indicates ,TO LITTLE AIR :: THIS MEANS THAT THE AIR SHUTTER IS OUT OF ADJUSTMENT:: NOTE - [ the flame burns a mixture of GAS AND AIR . AND THESE IMPROPER MIXTURES LEAD TO POOR COMBUSTION AND INEFFICIENT HEATING>
    TO ADJUST THE AIR SHUTTER:: #1- LOOSEN THE THUMB SCREW WITH YOUR FINGERS< MOVE THE SHUTTER Until YOU HAVE A LIGHT BLUE FLAME THAT HAS NO YELLOW TIP AND HAS NO ROAR SOUND COMEING FROM
    IT AND HAS THE PROPER AMOUNT OF AIR AND GAS MIXTURER : RETIGHTEN THE THUMB SCREW ON IT AND CLOSE UP PANEL AND TRY OUT GOOD LUCK AND LET US KNOW HOW YOU COME OUT ::HAVE A GOOD DAY AND GOD BLESS::F.B.E.
    Flying Blue Eagle's Avatar
    Flying Blue Eagle Posts: 2,056, Reputation: 225
    Ultra Member
     
    #4

    Feb 14, 2009, 07:41 PM

    ANACONDA- SEER your first post;ABOVE F.B.E.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Maytage Neptune model #MDG3000AWW gas dryer does not heat the air [ 4 Answers ]

My Maytag Neptune gas dryer model # MDG3000AWW runs fine but is not heating the air. With the front cover removed and the vent disconnected, when turned on the igniter turns bright orange for 30 seconds and turns off. This repeats every two or three minutes. It seams like the gas valve is not...


View more questions Search