Ask Experts Questions for FREE Help !
Ask
    siftin's Avatar
    siftin Posts: 5, Reputation: 1
    New Member
    		  
    #1

    Aug 25, 2009, 03:58 PM
    Maytag washer won't spin
    Hi,
    I have a top loader Maytag washer. I noticed loud noise during spin cycle and rubber burning smell. When I looked under the washer, I saw that belt melted into one of the plastic pulleys. I replaced the belt and pulley, and washer ran fine for few minutes. It's giving that loud noise again. I read through forum and made sure that the belt was tight, but now when I turn on the washer, it will take few spins and than it will stop. I can smell burning rubber after that.
    Did I install the belt wrong? I didn't open the agitator, should I try to open it and see if anything is stuck there?
    Any help/suggestions?
    houstonian2009's Avatar
    houstonian2009 Posts: 1, Reputation: 1
    New Member
    		  
    #2

    Oct 27, 2009, 08:59 PM
    Hi Experts
    I have exactly similar problem with my Maytag HAV2460AWW Top load washer.
    I will really appreciate for your help/suggestion
    lonestar2009's Avatar
    lonestar2009 Posts: 1, Reputation: 1
    New Member
    		  
    #3

    Oct 27, 2009, 09:07 PM
    Hi Experts
    I have exactly similar problem with my Maytag HAV2460AWW Top load washer.
    I will really appreciate for your help/suggestion
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Maytag Neptune washer LOUD spin out [ 7 Answers ]

Our refurbished Maytag Neptune washer was so quiet spinning out when we first got it two years ago. Now It is so loud when spinning out, we cannot hear each other talk. What can I do? (This is the same reason we replaced our last washer!) If it matters we do at least 15 loads a week... probably...

Maytag Washer loud noise during spin [ 2 Answers ]

I have a Maytag PAV3200AWW washer which recently started making a loud noise during the spin cycle. The sound is constant, varies directly with the speed of the tub spinning, and reminds me of a noisy bearing, or what it might sound like if the tub was trying to spin against the brake. :confused: ...

Maytag washer won't spin Model # MAV6057AWW [ 1 Answers ]

I have a Maytag Washer Model # MAV6057AWW. The washer fills, agitates, lets standing water out of the tub, but will not spin, to remove excess water from the clothes. I have tried other wash cycles, but with the same results. Do I have a sheared pin somewhere? Please let me know what you think....

View more questions Search