Ask Experts Questions for FREE Help !
Ask
    tom68's Avatar
    tom68 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jan 22, 2012, 02:03 PM
    Maytag LSE1000 washer stops because of imbalance. Seems to be way to sensitive.
    How can I determine if the balance springs and the imbalance sw. Are properly adjusted.

Check out some similar questions!

My Maytag washer fills with water and stops working? Buzzing sound no movement? [ 0 Answers ]

There is a buzzing sound after water fills. About a week ago my wife overloaded it with towels and when in spin cycle there was a loud bagging sound, not sure if that will help with why its not working. Thanks

Kenmore washer dryer combo, washer agitates for about 10 seconds then it stops. [ 1 Answers ]

The washer will fill and it will agitate for about 10 seconds, then it will stop.When it stops there is no motor sound.Then after about one minute it will start by itself and repeat the same thing over and over no matter what I set the knob to it does the same thing. Could it be the timer?

Washer Imbalance [ 11 Answers ]

My Kenmore front loader runs out of balance at very high speed. Previous to this it ran fine until my drain pump got plugged with a nickel that broke a blade in the pump. The washer went very imbalanced with the water not drained, very loud knocking/banging. I replaced the pump and the drain...

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.