Ask Experts Questions for FREE Help !
Ask
    Scorp1230's Avatar
    Scorp1230 Posts: 4, Reputation: 1
    New Member
     
    #1

    Jun 16, 2011, 03:35 PM
    Maytag electric Stove readout display
    I have a Maytag Gemini electric stove. We recently had a storm that knocked out power and when it was first restored the read out on my stove kept flickering. I was told that was due to low voltage. The elctric comepany came back the next morning and asked me to turn off the main circuit breaker which I did until they were done fixing my outside elctrical lines. When they were done I turned on the power but I no longer get a readout on my stove. I tried unplugging the stove and replugging it in but to no avail. Any suggestions?
    DocRyan's Avatar
    DocRyan Posts: 19, Reputation: 2
    New Member
     
    #2

    Jun 16, 2011, 03:50 PM
    It sounds like the control board could have gone bad. A lot of times when the power turns on and off like that there is a power surge, that is likely what killed it. But it could have been on its way out anyway.
    Scorp1230's Avatar
    Scorp1230 Posts: 4, Reputation: 1
    New Member
     
    #3

    Jun 16, 2011, 05:53 PM
    Comment on DocRyan's post
    Is this an easy fix? Or in other words is it something I can do?
    DocRyan's Avatar
    DocRyan Posts: 19, Reputation: 2
    New Member
     
    #4

    Jun 17, 2011, 06:58 AM
    Comment on DocRyan's post
    They are pretty easy to replace in most cases. Most are accessed from the rear of the stove by removing the rear panel. Good luck!

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

GE Stove Display [ 1 Answers ]

I just inherited my father's place and I have a GE range of undetermined age and model. The burners and oven are working fine, but the digital clock, timer, temperature display do not work at all. I'm hoping this is just a fuse that needs replacing. Can you help me out? Thanks.

My stove gas stove,electric piolit trips the breaker .repairman said it was 'energizi [ 1 Answers ]

GAS STOVE WITH ELECTRIC PILOT TRIPS BREAKER .THE REPAIRMAN SAID IT WAS 'ENERGIZED'? Landlord is replacing stove with gas pilot .will it still be energized/IS THAT DANGEROUS?

Frigidaire cpes389cc1 Stove display frozen blinking [ 0 Answers ]

We have a Frigidaire slide in ceramic stove model CPES389CC1 and I just heard a loud pop and then the power went off. It tripped the circuit breaker for the stove and the main circuit breaker for the whole house as well. The elements work but the display only reads only half of the PF for power...

Gas Maytag Stove [ 0 Answers ]

Hello to all, and thanks for taking your personal time to help me and others. My name is Evelio, and I have a Maytag gas stove. Everything works good except the oven, it just stopped igniting and therefore I have no way of starting the pilot light. I have learned that my gas stove does not...


View more questions Search