 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Ksrg25fkss15 ice maker
My ice maker has stopped working. I have thawed the freezer and supply line to icemaker. I have replaced the water control valve. Water dispenser is working. Removed ice maker and inspected for visual breakdowns. The control sensor is blinking (blink, blink, off). The ice rake is in the 12:00 position and been there for the past 24 hr.
What do I do next? Thanks |
||||
|
||||
|
Check the coils under your refrigerator. They should be cleaned with spray soap and a sprayer on a water hose, if possible. That's really the only way to get greasy dirt off the coils so it will cool down enough to make ice.You will have to remove the back cover after unplugging it and replace it prior to plugging it back in. You can usually pull out the drain pan from the front and clean it, too. Once you have it clean fill the ice maker with water. I just fill a glass with water and fill it. It will take 24 hours for the temperature to stabilize, but you need a thermometer to check it. When the temp in the icemaker gets to zero it should harvest. See if this manual helps: http://dl.dropbox.com/u/8010163/R-10...e%20Manual.pdf
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Just did the emitter/receiver test and that tests good, i.e. solid red light displayed. There is no ice in the ice maker leading me to believe that it must be a problem with the filler tube and or water inlet valve. Is there a way to check either of these to determine which it might be? Or am I...
There has not been any ice made for about a week. Any suggestions on what's the matter? The ice maker had been slowly producing ice even before that. However it has typically made the ice regularly.The model number is TFX20JRS.
Ice maker not making cubes my ge profile ice cube maker has stopped making ice
On my amana refrigerator, the ice maker leaks water at the inlet to the ice maker itself which drips heavily back into the dump tray which freezes the ice cubes all together. I was told the water inlet valve may be at fault. Why? Does the inlet valve have anything to do with the pressure going into...
The ice maker in my sub zero model 561 has continued to make ice even though the switch has been turned off. Now the ice drawer is jammed and the ice maker is jammed with ice cubes stuck together. How can I open the drawer and what can I do to fix this issue?
View more questions Search
|
