My sink runs fine, my sink sprayer runs fine, however, the head is loose and whenever I try to use it or sometimes even when I turn the water on, the head pops right off and water goes everywhere. Is there any way that I can secure it to the hose? Or do I need to replace it? If I have to replace it than will I have to replace the whole system or just the head? Please help, I can't do dishes with water spraying all over the place.
 | |
| Browse | Ask | Answer | Search | Join/Login | |
Kitchen Sink Sprayer Head Keeps Popping Off When I turn the Water On!!
Asked Jul 12, 2010, 08:01 AM
—
2 Answers |
| |
2 Answers
| ||||
| You can buy just the hose with the sprayer attached and change out the old one. I did this and it's easy and costs less than $10 depending on which sprayer you get. Once it starts acting up like that time to replace it. You don't have to replace the entire faucet - just the sprayer and hose. Or you can disengage the new sprayer from the hose and just replace the sprayer if the hose is okay. Can't buy just the sprayer though but the hose comes undone real easy. You might just end up doing like I did and just replacing the sprayer and keeping the hose as an extra. | ||||
| |
Not your question? Ask your question View similar questions
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Kitchen sink sprayer water smells [ 9 Answers ]
Hi! I am a newbie--any help is greatly appreciated! My problem is the kitchen sink sprayer. The water that comes out of it smells bad (kind of a moldy smell), but only for the first couple of seconds of use. After that the water seems fine. Also, if the sprayer was used very recently (as in...
Initial low water pressure with new kitchen sink sprayer [ 3 Answers ]
I recently removed a brita water filter from the kitchen faucet. After doing that I found the water pressure from the sprayer very low. I found that could be due to the krud that the brita filter was blocking getting into the sprayer. So I bought a new sprayer like the first one, i.e. a cheap,...
No water to sprayer in kitchen sink [ 8 Answers ]
I was having pressure problems in the kitchen (sink single handle faucet) Delta just changed all internal parts including the diverter and now the pressure is good but the sprayer attachment no longer works and it was fine previously. What did I do wrong
Kitchen sink sprayer hose water connection [ 2 Answers ]
The hose from my sprayer connects under my sink with an almost air-hose type connection with a small O-ring. (which is fine), What seemed to be left after it came off was a plastic casing in two parts, held together with wire. It comes from the manufacturer this way. Can anyone please explain how...
View more questions Search
|
