Ask Experts Questions for FREE Help !
Ask
    hawaiirenman's Avatar
    hawaiirenman Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 20, 2007, 04:20 PM
    Kirkland Washer Won't Discharge Water
    We recently bought a house here in Hawaii that had a Kirkland Washing Machine (made by Kenmore) installed in the area under the house (as is common here). When we checked it out, it filled and agitated, but would not run through the complete cycle. After agitating, the water just sits in the tub and does not discharge. The discharge pipe is at the correct height so something else must be the problem. Perhaps the contacts in the timer are corroded from the high humidity, or some other part needs to be replaced. Any ideas?
    blindman27's Avatar
    blindman27 Posts: 7, Reputation: 0
    New Member
    		  
    #2

    Dec 25, 2007, 09:06 AM
    Check the water filter and the water pump I think the problem lies there... perhaps something blocks the water to go out from the tube or the water pump is dead or blocked
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Washer discharge problems [ 3 Answers ]

Hi, I have a clothes washer that backs up from time to time and it only has 2 feet of waste line before the trap. I just was looking at a post here that says at least 4 feet of pipe before the trap are needed. I have snaked everything out and the waste line can easily handle a garden hose...

Washer Discharge Height [ 5 Answers ]

I need confirmation on my next project. I have to move the washer/dryer to a new location. Dryer is no problem. Water supply is not a problem, but I have no way to install a drain in the floor (I'm on a slab). I can run a 3" PVC pipe from the new location to the original drain location in a...

View more questions Search