 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Kenmore washer in spin cycle will not start w/o manual spin help
We have a Kenmore 70 series 110-26732500 that will fill for wash cycle, but when trying to start spin cycle to empty tub, machine will not start the spin cycle without manual help. By that I mean you actually have to rotate/spin the tub until you hear a click, then shut lid and the machine will finish the cycle. What is the problem?
|
||||
Check out some similar questions!
I have a whirlpool washer, I replaced the outer tub and the drive block, but it now doesn't spin. It drains the water, I can hear the motor come on, and feel the vibration . The switch is fine. I looked at the couple, but did not take it apart. The clutch looked fine, sanded the pads and case....
I have a Kenmore Elite Top Loading Washer, Model 110.24952300. When the washer goes to the spin cycle, it does not spin in the first spin cycle. It does this in the slow spin cycle that precedes the main spin cycle. When it cycles to the regular spin cycle, it does spin properly. I found that...
Hello All, I did find other matches to this question, but the circumstances weren't exactly the same, and they were old entries, so I'm starting another one. I have a Kenmore washer, I'm not really sure how old it is, 7 yrs (maybe), and the spin cycle is not running, the clothes are soaked...
RE: kenmore 70 series model 110.20712990 Type 111 top load washer. Won't spin. Humming noise and a little burning/hot smell when supposed to be spinning. Bypassing the lid switch did not correct the problem. Changed out the motor coupling with no luck... still a humming noise but no smell.
Just bought a four-month old Kenmore 600 washer - 1. hot water won't enter, 2. spin cycle does not start. Cold water enters fine. Agitation cycle works fine.
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
