It started after very full loac and violent shaking
Check out some similar questions!
Kenmore 70 Series Washer Not Spinning? [ 2 Answers ]
Kenmore 70 series washer spins very slowwwwww? Already replaced motor coupler..
Kenmore series 70 washer needs a push to help it start spinning [ 1 Answers ]
My washer doesn't start spinning on it's own but if I reach into the washer and give the tub a push, it will start to spin on it's own until it gets up to full speed and then it spins normally. This is the case both on the rinse and the final spin. I replaced the lid switch but nothing changed....
Kenmore washer 70 series not spinning/agitating [ 1 Answers ]
Kenmore Washer heavy duty 70 Series not spinning and agitating (model 110.828741200. What could be the issue? Thanks.
Kenmore 70 Series Washer not spinning or draining [ 1 Answers ]
I had an unevenly weighted load in the wash and the machine did it's little dance. By the time I could get there, it had bit the dust. Now my machine will fill and agitate, but it won't spin or drain. I've stuck a screwdriver in where the lid switch is and, viola, it starts to work. Do...
Kenmore Series 60 Washer not spinning [ 3 Answers ]
My Kenmore Heavy Duty Series 60 washer stopped spinning and draining on all settings. No noise, humming or motor sound, just stopped dead. Did check to make sure contact when lid closes was not the problem and it is not. Any clues? Thanks.
View more questions Search
Add your answer here.