Ask Experts Questions for FREE Help !
Ask
    momtomatthew's Avatar
    momtomatthew Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 22, 2008, 07:49 PM
    Kenmore Washer 44722
    I have a Kenmore Washer 44722 Model # 110.44722401

    The light on the console are flashing (to select a cycle), but the it won't stop flashing & the start button does not work.
    Credendovidis's Avatar
    Credendovidis Posts: 1,593, Reputation: 66
    -
    		  
    #2

    Jul 23, 2008, 02:42 AM
    Often this indicates that the lid is not properly closed down.
    Or that there was a previous unbalance in the load that caused the protection to block the machine from starting up. This is controlled by a switch near the lid.
    Just have a look there !

    To repair the problem : open up the unit and check the condition of that switch : measure the continuity of that switch with a multi meter in Ohms mode. Replace the switch if faulty.

    Please be careful : do not touch anything while the washer is connected to the power. Always remove the power : take the power cable out of the socket and put it on to the ground in front of you to make sure.

    If you need more help, just let me know by private mail (click on my handle and follow instructions) and I will return here to reply.
    If this helps solving your problem, than please rate this reply.

    Success !

    :)
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Model # of Kenmore Elite Catalysts Washer set to Kenmore 110.60936990 dryer from 1999 [ 3 Answers ]

I am experiencing weird problems with my top of the line Kenmore Elite Catalysts washing machine. I bought the washer and dryer as a pair for about $1700 in 1999. The dryer model # is 110.60936990 but the sticker has worn off the washer so I do not know the model #. I think it could be...

Kenmore stack washer/dryer - washer makes noise during wash [ 2 Answers ]

My son has a Kenmore stack washer/dryer that makes a noise that sounds something like a gear when washing only. Could this be a transmission problem? Jay

Kenmore washer [ 1 Answers ]

Why is my kenmore washer agitator (the top part) not working?

Kenmore washer dryer combo 110-92966-102,washer agitates for a little then it stops. [ 0 Answers ]

Kenmore washer dryer combo 110-92966-102, The washer will fill and it will agitate for a little bit for about a minute, then it will stop before finishing.When it stops there is no motor sound.No matter what I set the knob to it will not start up again,but if I wait several minutes it will...

View more questions Search