Ask Experts Questions for FREE Help !
Ask
    frankk56's Avatar
    frankk56 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jul 11, 2015, 05:09 PM
    Kenmore Ultra Wash Dishwasher 665.15895792 just lights up
    Hi,

    We have a kenmore ultra wash dishwasher we got from someone since ours was dead.
    Model #665.15895792 and it doesn't do anything. Lights up, timer goes down like it should but no water is coming in, arms are not moving etc.

    I read the post on resetting the dishwasher but those examples are not what my unit display shows and I tried multiple buttons pressing them to see if it would reset and nothing.

    The service guide under the toe plate is gone so can't use that, any ideas?

    Thanks!!
    sidit's Avatar
    sidit Posts: 5, Reputation: 1
    New Member
    		  
    #2

    Jul 12, 2015, 03:01 AM
    Visit this. I hope you find the right direction solving your problem.
    kenmore dishwasher lights are blinking, doesn't run | ShopYourWay
    frankk56's Avatar
    frankk56 Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Jul 12, 2015, 03:54 AM
    Thanks for the reply sidit!

    I have read that post and it gives a link to the owners manual, and I need the service tech guide for this model and hoping I can get mine to reset.
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #4

    Jul 13, 2015, 10:08 AM
    Here are some service manuals that will show you a lot, even though not all are about your exact model. One thing I would check first would be the water valve and solenoid. You will need a good multimeter to do anything with an appliance. You just cannot fix modern appliances by guessing. The best many of us can do at times is to give you an educated guess unless we know the meter readings. All dishwashers are made very similar. Here is what you need to help you diagnose it: https://dl.dropboxusercontent.com/u/...ice_manual.pdf
    https://dl.dropboxusercontent.com/u/...ishwashers.zip
    https://dl.dropboxusercontent.com/u/...dishwasher.pdf
    https://dl.dropboxusercontent.com/u/...t%20codes.docx
    https://dl.dropboxusercontent.com/u/...t%20Codes.docx
    https://dl.dropboxusercontent.com/u/...e%20Manual.pdf
    https://dl.dropboxusercontent.com/u/...20Handbook.pdf
    The last two books are very good and teach you quickly how to use a meter. You need a good meter, like a digital clamp meter: Attachment 47614
    You can find a meter like this at Home Depot for $42.38. For the price I have not found a better deal. See: Commercial Electric Digital Clamp Meter-MS2002 - The Home Depot
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore ultra wash dishwasher model 665.13249k900 all lights are lit after diagnostic [ 1 Answers ]

After pushing the high temp and heated dry buttons repeatedly a diagnostic mode started. It ended with all lights on. What does this mean.

Kenmore Ultra Wash 665 dishwasher. [ 1 Answers ]

The "Lock On" light is suddenly flashing. Tried to "cancel" & the dishwasher goes into drain cycle. Light goes off & then comes back on. Is this a mechanical problem associated with the door switch or a code Re-set? Thanks.

Kenmore ultra wash dishwasher 665 [ 1 Answers ]

Red lock light flashing. Have tried everything I have read on line to fix to no aveal nothing works. HELP

Kenmore ultra wash dishwasher troubleshooting 665 [ 0 Answers ]

The dishwasher will not turn on. I've checked the Bi-metal fuse and its OK. I've checked the power to the control board and its 120V. Check continuity on the door switch and its fine. So when I shut the door in a few moments the green wash lite comes on with the pump and it appears to be...

Blinking lights on kenmore 665 ultra wash dishwasher [ 0 Answers ]

Tried all sequences none have worked very fustrated kenmore ultra wash 665 1671

View more questions Search