 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Kenmore Ultra Wash 665.159 blinking lights
I have a Kenmore Ultra Wash Dishwasher Model 665.159 that will flash the Pots & Pans plus the Quick Rinse LED's. Sometimes the dishwasher will start a cycle but stop and shows a "2" on the Delay Start display and then it seems to try to re-start to cycle the washer and continues that way until you press cancel. I can turn off the power to the dishwasher and leave it for awhile but this does not help. This is an 11 year old dishwasher and I don't know if it's worth putting money in to it or try to fix it. Any feedback is appreciated.
|
||||
Check out some similar questions!
I have a 3 year old Kenmore dishwasher. Recently my hot water heater went out and I did not know it. I had started the dishwasher, and since the dishwasher did not sense hot water, it began blinking. The cleaning light blinks green 7 times and then repeats. I found out later about the problem...
I've read every post on this thread. I haven't been able to find the right combination. Mine is a Kenmore Ultra Wash Quietguard 1, model number 15632000. It has different button names than any others I've seen on this thread: CYCLES Pots/pans; normal wash; water miser; light wash; quick...
I have a Kenmore Ultra Wash dishwasher that is approximately 7 years old. About 3 days ago the lock light started blinking. I held the No Heat button for 4 seconds to unlock but it did nothing. I can push the cancel/drain button and that only causes them both to blink. I have tried cutting the...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
