Ask Experts Questions for FREE Help !
Ask
    hansened's Avatar
    hansened Posts: 2, Reputation: 1
    New Member
     
    #1

    Dec 18, 2009, 12:00 AM
    Kenmore series 90 spin cycle
    Stops when I get to the spin cycle. Water never drains. Never spins, rinses. Is this a timer,control part ?

    hansened at hotmail.

    Tnx

Check out some similar questions!

Kenmore washer 70 series humming at spin cycle - won't spin [ 4 Answers ]

RE: kenmore 70 series model 110.20712990 Type 111 top load washer. Won't spin. Humming noise and a little burning/hot smell when supposed to be spinning. Bypassing the lid switch did not correct the problem. Changed out the motor coupling with no luck... still a humming noise but no smell.

Kenmore 80 Series Wash won't spin cycle [ 0 Answers ]

Kenmore 80 series Washmachine washes clothes but won't spin out water. It drains but won't start spin cycle. I can stick my finger in the button and start the drum, if clothes are evenly balanced if I spin it fast enough it will start going on its own. Once inawhile it will go on its own but...

Kenmore Washer 70 Series doesn't go into spin cycle automatically [ 1 Answers ]

I have a Kenmore top loading Washer (70 Series). Once the machine gets to the spin cycle the motor will kick on, the water will drain, but the machine won't spin. If you let it run it will continue with the cycle, and will enter the rinse cycle as normal, at the end of the wash cycle the clothes...

Kenmore 110 Series Washer Viberates voilently at spin cycle [ 1 Answers ]

Hi I have a top loading 110 series Kenmore washer. I replaced its coupler and it was laying on its side for almost one week till that coupler arrived. I also tried to separate drum from coupler which was not successful. So I removed motor from bottom and replaced coupler. Now it works fine but...


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.