Kenmore series 80 model 11022802100 timer dial spins freely

pam825 Posts: 1, Reputation: 1

New Member

May 30, 2011, 02:53 PM

Kenmore series 80 model 11022802100 timer dial spins freely

Ok, I got it off, and bought a replacement part. How do I get it back on, and how do I know where and which cycle the timer is in so that it will be synchronized?

Check out some similar questions!

Can I adjust my Kenmore washer timer dial? [ 2 Answers ]

My 2007 kenmore washer (model 27741600) is having an issue with the timer dial. The washer fills, agitates, rinses, and spins, but none of these happen according to the dial. If you start a load at the beginning of a cycle, it will "end" filled with soapy water (as if it is in soak mode). You...

I have a kenmore 80 series dryer(gas) it spins, gives off little heat but almost no a [ 0 Answers ]

Have a kenmore 80 series gas dryer. It tumbles some heat but no air is being blown out of exhaust.

The right auger on Murray 624804x79 spins freely [ 1 Answers ]

The right auger on my snowblower spins freely. The left side works fine. Is this an easy enough fix? Manuals available? Are there repair guides that I could look at?

Kenmore 70 Series spins very slowly [ 2 Answers ]

I have a Kenmore 70 series washing machine. It was with our home when we purchased it so I am unsure about its age. I would guess it is maybe 6 years old. For the past month the spin cycle has been going VERY slow. I usually have to run it about 2-3 times. This is becoming less effective and my...

Kenmore washing machine timer dial knob [ 1 Answers ]

This older model of Kenmore top loading washing machine has the type of dial that pulls out to select and push in to start. My dial will pull out to select, but not really engage. Will push in but does not start the machine! Help! Don't know where to begin.

View more questions Search

Check out some similar questions!

Add your answer here.