 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Kenmore refrigerator compressor wiring
Hi,
I have a Kenmore refrigerator model 106.50599000. I just order a new harness and original capacitor for it. The problem I have is the technician my brother hired before cut the original wiring and put in some replacement capacitor that connect to the compressor. And now the evaporator fan is not working, so I want to put everything back to its original. So I bought new harness and capacitor. Since he cut the wiring and remove some of the original wire, I can't put them back together since I don't have the schematic. Can someone help me find a schematic or help me put the wiring back? I need help with the wiring at for the compressor side which has a capacitor and reset that connect to the 3 pins on the compressor. If anyone can help, I am greatly appriciated. |
||||
Check out some similar questions!
My Compressor Quit Working A Few Months Back. The A/c/ Repair Guy Stripped The Burnt Wire On The Compressor And Added A New Wire It Worked Ok. I Called Another Company For My Yearly Service He Said The Wire Was Burn . He Pulled All Of The Wires Lose And Left. The Unit Is A Bryant That Says 1982...
I am working with refrigeration systems for some research. I am looking at the compressor map and have been told that a correction factor of .75 is fair to assume for conditions outside of the map's designated superheat and intake temp. Does anyone know where I can obtain any articles to support...
Need some help. I was weed eating around my outside coils and compressor when my weed eater cut the wire that runs from the 24 volt transformer inside. I connected the wiring back and now my air won’t come on. I have a Trane XE 60 furnace. I tried connecting “R” “Y” to see if the compressor would...
I have a new air compressor for my hot rod fabrication. The specifications are as follows, 5.5hp 80gal 24amp 240v. My question is, it calls for a 30 amp breaker and time delay fuse, Type "T". I am running 6/2 wire to supply the unit, it is about 90 ft from the main panel so we ran 6/2 for minimal...
I had some work done by a repairman last fall because my pilot would not light. He said it was a wire that came loose and fixed it. Now, my compressor won't come on. Blower comes on fine. Based on some other concerns with this repairman and the previous problem, I suspect wiring. Plus, there...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
