Hi, When I bought my machine, the previous owner offered the following description: It is about 2.5 years old. We had some problems with it spinning the proper speed after moving it. The repair people told us it was due to using too much soap or being imbalanced. Had it repaired a couple...

I have a Kenmore front load washer Model 44152 and it attempts to fill with water approximately 2 seconds and then stops. Originally machine stopped in middle of cycle. Machine will not spin.

I will come back to my front load kenmore after it has sat Idle for several hours and there will be water in the washer and I have to run the drain cycle to get rid of it. I'm worried that it might overflow when I'm gone. Is there a fix? Thanks

I found a troubleshooting guide inside the cabinet that says, "...set timer to the start of the Regular wash cycle and pull the know out. If the motor does not rotate, check for a poor connection in the timer line switch or door lock switch. If good, and motor does not run go to step 3". ...