Ask Experts Questions for FREE Help !
Ask
    pennsy's Avatar
    pennsy Posts: 1, Reputation: 1
    New Member
     
    #1

    May 20, 2008, 02:48 PM
    Kenmore elite washing machine will not agitate or spin
    I have a four year old kenmore elite washing machine that will not agitate or spin and only makes a loud humming/grinding noise. It sounds a s if the mottor is running, yet is diengaged from whatever turns the agitator.

    Any help is much appreciated!

    Thank you,

    Dan
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
     
    #2

    May 20, 2008, 04:36 PM
    Replace the coupler. Cost about $35.00. It is located between the motor and transmission. This will solve your problem. Easy to fix. About 30 minutes

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore elite washer won't spin or agitate [ 11 Answers ]

I have a 5 year olf Kenmore elite washer that does not spin/agitate or pump water. Took the shell off, pump off, motor off. I left the motor connected to the wiring, tried to spin/agitate, but get no motion on motor, just a buzzing noise. Seems like the motor is bad? Is there any way to test this,...

Kenmore Elite Catalyst Washing Machine doesn't spin [ 32 Answers ]

I'm not sure if I have the correct model number. Nothing on back of washer. Under lid: SM 9710768-C. This is a Kenmore Elite Catalyst heavy duty, top load, king size capacity, ultra quiet pak, 3 speed motor with 6 speed combinations washing machine. I've tried both spin speeds, but neither work....

Kenmore Elite Washer does not spin or agitate [ 3 Answers ]

Model 417.42142100. Front loading machine. Does not spin or agitate, drum will not operate. Everything else seems to work. Fills, drains, makes noise like it's working during all cycles.

Kenmore Elite washer won't spin\agitate\drain [ 1 Answers ]

I have a 110.20072992 that won't spin, agitate, or drain. I have walked through the diagnostic mode and get no activity except for getting water into the tub. I have scanned forums and run across possible solutions (coupling, controller board) but those are solutions for partial symptoms. I...


View more questions Search