 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Kenmore elite sensor smart 3 speed washer troubleshooting
My washer has stopped after the fill cycle and has given me an F1 signal. Attempts to follow manuals instructions to clear and start again have failed, resulting again in the F1 signal. I'm wondering if, because the washer is filled with water, if draining it would allow me to reset, but I can find no way to bypass the cycle selections to drain water. Help!!
|
||||
|
||||
|
Here are some manuals to help: https://dl.dropbox.com/u/8010163/Ken...sher_Elite.pdf
https://dl.dropbox.com/u/8010163/Und...c%20washer.pdf I suggest you learn how to use a meter. It's a basic skill that is super easy to learn. You have a bad fill switch, possibly, but check it out first before blindly replacing it. |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
My Kenmore Elite washing machine will fill up with water, but will not start washing or agitating. I've unplugged it and plugged it back in. There is power to the outlet. I've also closed the lid real hard, and it still won't start.
How do you turn on a kenmore elite smart quiet pak 9 washer. I unplugged it ,now its won't turn on at all. What do I do?
My washer flashes a code 35 then stops working for 20 min
Hello I have a kenmore elite washer that will go thrue I wash cycle and when it is time to spin it will set a errer code fh, after resetting you can hear water entering for several minutes until it resets the same code, could this be a pressure switch problem.
H3 elite kenmore front loader washer flashing f,h during rinse/drain cycle?
View more questions Search
|
