 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
My kenmore elite he4 electric dryer control panel will not light up, any ideas?
I have a kenmore elite he4 electric dryer, the interior lights come on when you open the doors, although none of the red lights on the control panel will light up. I checked the breaker by turning it on and off a couple of times. No change. I was going to check the
Thermal fuse. Not quite sure how to check and if this could even be the problem. Any ideas? |
||||
Check out some similar questions!
I have a Kenmore Elite Electric dryer, model 110.64992300 that will not heat. I suspect the heater relay is bad, but I can't open up the top console to get to the electronics. Do you know how to open it or have directions showing how? I don't want to break anything.
I have a Kenmore Elite Model # 110.600094990 27 inch Electric Dryer - NOW How the heck does one take the Toe Panel Off / or Open this lower section of the dryer? There are two lower edge clips and two upper edge retainers. I CAN NOT get the panel to budge! This is a 7 yr old unit. Thx DAS
My dryer turn off all by itself. An error code of E1 appears. We press start/cancel and start the dryer again. After a few minutes it shuts off again displaying the error code once again. Help... :eek:
For the life of me, I cannot determine how to remove the top Control Panel of a Kenmore Elite 110.24952300 Washing Machine. I want to hinge it back so I can remove the cabinet and access the pump. Am I missing the obvious?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
